(approx) 1 Hour
Simple installation for anyone.
Hey I’m Justin with AmericanMuscle.com, and I’m taking a closer look at these front and rear caliper covers from MGP fitting all 99-04 V6 and GT Mustangs. Here’s the deal, aftermarket big brake kits are not cheap and fitting your factory calipers can sometimes turn into a disaster if done incorrectly. These covers from MGP are a great way to cover up those factory calipers, while adding a little bit of customization and keeping brake dust off your wheels. The caliper covers are available in your choice of either black or red, and with a number of different logo options. For instance I have here the black GT, the classic running Pony logo in red, the complete Cobra setup in black, and I also have with me the red GT and many more. Taking a closer look at the calipers themselves you’ll notice a high quality T6 aluminum construction, along with that black or red powder coated finish. Finally, the officially licensed logo is engraved right in the center along with some simulated hardware, just for a more realistic look. The install really isn’t all that bad and should take you about an hour from start to finish. You will need to remove your wheels so make sure you have your jack, and you’ll also want to make sure you have a 3/8” wrench handy, just to tighten up the hardware on the covers themselves. Other than that, everything is very straightforward. So if you’re tired of looking at those rusty factory calipers on your ride, and you don’t feel like forking out money for an aftermarket big brake kit, then be sure to check out one of these officially licensed caliper covers from MGP right here at AmericanMuscle.com
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1999 2000 2001 2002 2003 2004 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
November 04, 2019
These mustang caliper covers were easy to install and looks great too!Helpful (0)
July 29, 2019
Love these new caliper covers for my 2003 Mustang. looks great with the new wheel kit I got from American Muscle!Helpful (0)
June 13, 2019
Summer 2019 Catalog
Why are these caliper covers listed at $249 on the website and $199 in the Summer 2019 Catalog?Helpful (0)
August 09, 2018
Mixed review.. I love the look. However I did not like the install of the front caliper covers. The front caliper covers were very difficult to install properly. After multiple adjustments they still kept scraping. I had to wind up cutting off 1/8 of an inch from the support brackets for the front so it would stop scraping against the caliper.Helpful (3)
July 05, 2018
Well pleased with the new look and fit. I have gotten so many complimentsHelpful (5)
July 03, 2018
Red Caliper covers on White Stanh
The caliper covers added to our white on white on white, added the touch of color and interest this 2002 Mustang V6 needed! Along with the black chin spoiler it is looking cooler by the minute!Helpful (5)
May 18, 2018
These caliper covers are high quality and fit great. They really changed the look of my mustang. With the new Bullitt wheels I installed a few months ago they really tie the look together. The hardest part was pulling off the wheels if that says anything about the ease of installation. The rear brackets needed to be bent slightly to fit just right but I was able to do that by hand and it only took an extra minute to get perfect. I would highly recommend, especially if you have aftermarket wheels and want to make the look pop.Helpful (6)
March 14, 2018
I ordered chrome wheels for my Mustang and when they came in I had the tire dealer put the calipers on. They really made the car a eye catcher! They had to do a little adjustment to the front calipers for fit but they look awesome! !!!Helpful (6)
February 02, 2018
Very easy to install took about an hour . Has that great lookHelpful (6)
October 31, 2017
New look no break dust
Simple install with a great look id recommend this look over painting your calipers unless you decide to buy pre painted performance calipers.This will give it clean look your ponyHelpful (7)
How well do these prevent brake dust from getting on the wheels?
Caliper covers are notorious for for collecting additional dust created from your brake pads. It does not make the actual brakes create less dust but will help collect the dust from making contact with the wheels.
I have 1999 Base V6 with 17 × 8 rims. Do i need a spacer if I want to buy the poduct?
Spacers will not be needed with 17x8 wheels on a base model 1999 V6 Mustang.
Do these calipers snap on or do the have screws and bolts to fasten them on.
Hi, The MGP Caliper Covers for 99-04 V6 and GT Mustangs use 8 mounting clips,bolts and nuts that are in included in this kit.
will these fit, i have wheels off a 2008, but i am concerned about clearance. looking at my wheels as they are now on the car, it looks like about an 1/8inch maybe a bit more. will the covers clear the wheels or do i need to add spacers on each wheel? and if i need a spacer what size would i need with out making the wheels appearing to "stick" out to far?
You just need to have 2 quarters put together in width of room between the caliper to the inside og the wheel.....maybe 2)3 quarters width to be safe.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box
Fits V6 and GT's with stock brake calipers only, does not fit Bullitt, Mach 1, or Cobra