(approx) 5 Minutes
Simple installation for anyone.
$59.99 (each)FREE Shipping
Hi I’m Justin with AmericanMuscle.com and I have a great way to customize your emblem on the deck lid of your 2010-2012 Mustang. I’m taking a closer look at MMD’s rear emblem cover available in matte black and pre painted. This emblem cover is another unique creation from industry leader MMD, who continues to produce must have styling options specifically for your late model Mustang. And if you’d like to see more cool parts from MMD in addition to more pre painted parts, you have to subscribe to our YouTube channel. Simply click on the banner below now or click on the AM logo up in the corner at any point during this video. Love it or hate it, that rear emblem on the original Mustangs back in the 60’s was one of the original iconic styling cues. Of course on those early cars it was used as a functional gas cap, before being reintroduced on the 05 and newer cars as more of a decorative emblem. For those of you who really dig the rear emblem but wish you could tone down the chrome and dash a little bit, this is your part. MMD came up with the cover in a pre painted version along with a matte black version. The matte black version would be great for someone building their own project blackout, and works great on its own, or along with MMD’s magnetic deck lid panel, which we do happen to have installed on our 2011 GT behind me. This is one of those times I really encourage you guys to go back to the product page if you’re not there already, and take a good look at our customer submitted images. If you’re not on our site already all you have to do is simply click the link below to head back to AmericanMuscle.com. The pre painted version on the other hand is spray painted right here at AmericanMuscle.com headquarters, using the same base and clear coat urethane paint Ford uses in their factories, so obviously the paint match is going to be right on the money, and give you more of a factory type appearance. The best part is, this could not be an easier install, all you need to do is simply clean the factory emblem using the supplied alcohol prep pads, remove the protective backing on the 3M automotive tape and adhere the cover carefully to your ride. Getting all this done really should take you only a couple of minutes from start to finish. Again, if you have any questions about the product, about the install, or about the fitment, we always encourage you guys to give us a call, the number is 855-422-7439, or if you prefer you can write us an email at support@AmericanMuscle.com. So if you don’t want to totally get rid of that rear emblem on your 2010-2012 Mustang, but wish you could tone it down a little bit or customize it, then you should definitely check out MMD’s pre painted or matte black emblem cover, available right here at AmericanMuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Note: Trunk emblem surround only compatible with the Magnetic Decklid Panel as the other decklid panels are too thick and will not allow the emblem to sit flat unless trimmed to fit.
Fitment: 2010 2011 2012
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 29, 2020
Better than I thought
So much better than I thought. Looks factory. Couldn’t be happier.Helpful (0)
February 25, 2020
Really Easy to Intall
Really good quality not sure how long its gonna stay on really love the way it looks on the car makes a major difference. But can still see a little chrome from top-down viewHelpful (0)
January 03, 2020
It took a little pressure to install it but once I used some elbow grease it stuck on great. I just got some subwoofers and I was scared that it might pop off but the adhesive is strong and holds well. Looks amazing as well.Helpful (0)
September 08, 2019
Looks good it makes the back end of the car look clean and simple easy to install.Helpful (0)
August 10, 2019
Looks great, perfect fit
On my Red GT with all the matte black trim, it is just the right touch.Helpful (0)
August 09, 2019
I dislike anything that says “Ford” on my car (unless they pay me to keep it... off it goes) this was the perfect piece to finish off blacking out my mustang, a little light for “black” it’s more of a grey than I would like but overall completed it well, you could always plasti dip this whatever color you want before attaching it to the vehicle as well.Helpful (0)
July 31, 2019
Perfect for the look I am going for. Easy to install, only took couple of minutes.Helpful (0)
April 11, 2019
Came in very well packaged. Easy to put on and looks great.Helpful (0)
April 08, 2019
Right color and surface
Looks good. Only slight gap between Surround and emblem and that is doe to the two sided tape. Blends with the original black out trunk decal.Helpful (0)
March 01, 2019
Easy install and looks amazing and fits perfectly over stock logo. If you're like me and not a fan of alot of chrome this is perfect for your rideHelpful (0)
Will this fit with the SpeedForm Decklid Translucent Smoked Panel?
The Trunk Emblem Surround will not work with the SpeedForm Decklid Translucent Smoked Panel
Do you have these to fit 2014 Mustang?
Hey David, Unfortunately we do not have anything yet for the 13-14 models but there may be something in the future
Will this bezel go around he gt500 decklid emblem?
The MMD Trunk Emblem Surround will clear the GT500 decklid emblem.
Can I get the dimensions on this product. Like size of outer circle, inner circle. Want to find out if it would fit the cap that is on my 2010 mustang. Mine came with the cap that comes with the decklid that's a one piece, panel, unlike the one in the picture.
The MMD Trunk Emblem Surround is meant to fit all 2010 model Mustangs. There was only one style cap that came with the car from with these cars. It will look different in these pictures since the picture is of the Emblem Surround installed. But I guarantee this part will work with your car with no issues.
Does it work on the 13/14 cars? I can't seem to find one that specifically says that it does.
The MMD Trunk Emblem Surround - Matte Black (10-12 All) will not fit the 13-14 mustangs. This kit will only fit the 10-12 mustangs.
The MMD Trunk Emblem Surround - Matte Black (10-12 All) will not fit the 2014 V6 Mustang as the 2013-2014 trunk emblems are a different size than the 2010-2012 model Mustangs.
It will fit the GT/CS emblems. No problem.
Unfortunately, this MMD surround is not compatible with the MMD Decklid Panel. The only decklid that will fit without modification would be the Magnetic Decklid Panel - please see link below.
(approx) 5 Minutes
Simple installation for anyone.
What's in the Box