SR Performance Steel Flywheel; 6-Bolt (96-98 Mustang GT; Late 01-10 Mustang GT)

Peace of Mind. When replacing or upgrading your Mustang's clutch you have two options, resurfacing your old stock flywheel, or getting a brand new flywheel. A new flywheel is a much better choice than resurfacing, as it will dictate how well your new clutch will perform, as well as how long it will last.

Steel Construction. Manufactured from steel for extra strength, this SR Performance Flywheel features a ring gear of 164 teeth, an engine balance of 0 oz, and a six bolt main pattern. Steel flywheels are perfect for street and race applications where off the line acceleration is desired.

SFI Certified. If you're using this flywheel in high performance or racing applications, SFI Certification is critical so you can run your Pony at the track or strip. And it's great for peace of mind even in a daily driver - at higher RPMs, stock cast flywheels have been known to explode.

Application. This SR Performance Steel Flywheel; 6-Bolt is designed to fit 1996-1998 GT, late 2001-2004 GT, and 2005-2010 GT Mustangs equipped with the 4.6L V8 engine.

Technical Note. This Flywheel is designed for the GT Mustang's with a six bolt main. 2001 Mustangs with production date after 06/01 have a six bolt main.

Please Note. Romeo built engines have 6 bolt cranks and Windsor built engines have 8 bolt cranks. If the 8th character in the VIN is an "X" its a Windsor block, if the 8th character in the VIN is a "W" it is a Romeo block. There is an exception to that rule as the 2001 Bullitt Edition Mustang feature a Romeo built engine. If unsure please check with your Ford dealer to determine if you have a 6 or an 8 bolt main.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov