UPR Products Billet Oil Catch Can; Z-Bracket Mount; Black (11-23 6.4L HEMI Challenger)

Brand New UPR Signature Series Billet Catch Can System with Mounting Bracket for your 2011 to Present 6.4L equipped Challenger, Charger, and 300. This Catch Can was developed to out perform all the other 2 chamber catch cans with a patented internal diffuser system that forces the oil to be released into the catch can from a lower chamber then the fresh air can exit through the upper chamber. This is because all the traditional 2 chamber catch cans have two chambers side by side and with a screen that separates them. Side by Side chambers with a simple screen or honeycomb filter allow oil to be sucked right across and out the exit port of the catch can.

Most of the top brands out there are what is called 2 chamber pull through catch cans as they all allow as much oil to be pulled through them as they collect and this is why they can have such small oil capacities and be drained so infrequently. With the UPR Catch Can you have to check them every 500 miles to maintain the oil level. Wheres other catch cans usually say to check them every 2000 to 3000 miles and you should be fine. UPR takes pride in their products and always strives to deliver the best looking and performing products.

All UPR Catch Cans are machined from 6061 Billet Aluminum and use forged aluminum fittings along with Viton O-rings and the highest quality Braided Hoses on every model. We don't sell you a catch can and with all the rubber or plastic hoses and plastic fittings and then tell you to get the best you have to upgrade your hose and fittings. With UPR it all comes STANDARD at no extra cost!

You will see improved MPG and Improved Performance throughout the Entire RPM range

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED

Product Features
Show Quality Finish
1/2" Nickel 90* fittings
Can measures 4.75" x 2.5"
Easy 20-30 minute install
1/2" Oil Resistant Hose included
Prevents Oil from Entering Intake
Improves Fuel Economy & Performance
Stainless Steel Mesh Filter Material
High Quality CNC Machined Billet Aluminum
Available in Satin or Black - Select Finish Above

Fitment:

• 2011 Dodge Challenger
• 2012 Dodge Challenger
• 2013 Dodge Challenger
• 2014 Dodge Challenger
• 2015 Dodge Challenger
• 2016 Dodge Challenger
• 2017 Dodge Challenger
• 2018 Dodge Challenger
• 2019 Dodge Challenger
• 2020 Dodge Challenger
• 2021 Dodge Challenger
• 2022 Dodge Challenger
• 2023 Dodge Challenger

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov