(approx) 2 Hours
Light to Moderate mechanical skill required.
$209.99 (each)FREE Shipping
Open Box from $125.99
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Hey guys, it's Sara with americanmuscle.com. And today, we have a review and install of the V3R Wicker Bill Rear Spoiler Add-On in Gloss Black, fitting your '15 and newer Dodge Challenger models. This is perfect for the Challenger owner that wants to add some style to their car and wants a wicker bill option that bolts directly to their current wing. It features automotive grade plastic construction with a nice, gloss black finish and it includes a clear section that can be mounted how we have it on the outside or you can mount it on the inside as well. This wicker bill add-on features track-inspired styling with an aggressive design to give your current wing a more aftermarket look.So, as far as price goes, this wicker bill comes in at right around $225, which is middle of the road price-wise when compared to other options. And for your money, you are getting a more aggressive design when compared to those other options and it bolts up to your current wing so you don't have to replace it.So, as far as the install goes, I'm giving this one a two out of three wrenches on the difficulty meter. It does bolt to your current wing but you will need to drill several holes and install rivnuts in order to bolt it up. That means you'll need a drill, as well as a rivnut tool for this install but it can be done within two hours. So, with that said, let's check out that install.For this install, you will need a drill as well as drill bits, a 4-millimeter Allen key or Allen socket and a ratchet, and a rivnut installation tool. All right. So the first step in our install is to mark where we wanna drill our holes and what we're gonna start with is marking the center. So, grab yourself some masking tape. And we're gonna start to mask off the center of your wing. Now you can use the backup camera to help you center this or you can measure end to end on the spoiler.Once you've found your middle point, go ahead and mark it with your piece of tape. Now you can take the larger piece of your wicker bill add-on and start to line it up using that center point. We wanna check the general location of each of these holes, and then we'll mark down where we wanna drill. Now that we're checking fitment and we like how the wicker bill's lining up, what we're gonna do is mark each location with a piece of tape.This will help us so we can mark where we want to drill. Repeat that with the rest of your mounting hole locations until they're all marked with some tape. Now that you've marked all of the locations for drilling, I do recommend just double-checking the fitment of the wicker bill making sure you can see tape through each of these holes so that we can go ahead and mark these down. Now once the wicker bill is sitting exactly where you would like it to be, grab a sharpie and mark each of the holes on top of that tape. And then repeat that for the rest of your holes.All right. Now that all of your holes are properly marked, you can double-check with the measuring tape measuring from the center point out to the corresponding hole on each side making sure those two measurements are within the range of each other. Now that you're happy with the placement of each of your markings, we're gonna go in with a small drill bit to drill a pilot hole and then follow it up with a larger one the size of the rivet. Repeat that with the rest of your markings.Now at this point, we can choose the larger drill bit size that corresponds to the rivnut that we're going to use. Now in order to choose the right size, all you do is take your drill bit, line it up to the rivnut, and make sure they are the same size. Now I've already done the work for you, so you guys are gonna use a 21/64 drill bit for this rivnut but if you would like to double-check, go ahead and measure before you drill. All right. And now that you have that larger drill bit on your drill, go ahead and drill out those pilot holes. Repeat that for the rest of your holes.Then once your holes are drilled, you can remove all of your tape.All right. Now we can install the rivnuts into those holes that we just drilled. What you're gonna need is a rivnut tool similar to this one and you will need a 1/4-20 attachment on the end that is the size of these rivnuts. Go ahead and thread it on to the end of the tool. Once you have the rivnut installed on your rivnut tool, line it up in the hole that you drilled and go ahead and compress it to seat it down properly. Repeat that with the rest of your holes.And now that all of the rivnuts are installed, what we're gonna do is grab the wicker bill and line it up with the hardware that's been included. We're gonna start with each edge, one side and the other. Go ahead and get one on either side threaded in. Keep them loose for now until they're all installed. Repeat that for the far side on the other side.Now that we have a bolt on either side, we're gonna install the clear piece over top here. We're gonna do the same thing with the bolt hole at the far side. Line it up with the wicker bill that we just installed, and then through to the rivnut. Get it threaded in and then repeat that on the other side. Line up both of the holes on the other side and thread in your bolts. Now you can finish installing the rest of your hardware.Now that all the hardware is installed, go ahead and adjust the wicker bill as needed to make sure it's sitting exactly where you want it. Then grab a 4-millimeter Allen key or Allen socket and tighten these down. Repeat that and tighten down the rest of your hardware.All right. So that is gonna do it for the review and install of this wicker bill add-on. And remember, for all things Challenger, keep it right here at americanmuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Bold Performance Styling. Take your weekend warrior Challenger’s style to the next level with the V3R Wicker Bill Gloss Black Rear Spoiler Add-On. This wicker bill rear spoiler add-on features a specialized, 2-piece design that adds a distinct high-performance style to your vehicle. Best of all, its lightweight yet tough construction won’t add any significant weight to your rear Challenger's end, a factor that can enhance your vehicle’s driving dynamics.
Boosted Aerodynamics. Wicker bills are a well-known aerodynamic component commonly used in the world of motorsports used to extend the surface area of the rear wing. When installed on your Challenger, this wicker bill rear spoiler add-on provides the same benefits as their racing counterparts. Specifically, this rear spoiler add-on provides additional downforce, improving your vehicle’s handling, particularly when cornering. This improved handling can help give you a competitive edge when race day arrives.
Heavy-Duty Build Quality. This rear spoiler add-on is manufactured from high-grade ABS-plastic, making it quite durable and highly resistant to deterioration. Additionally, this add-on is precision-molded and cut to laser-scanned measurements. The result is a component offering an exact fit when installed. Finally, this wicker bill comes in a sleek gloss black finish.
Uncomplicated Installation. This rear spoiler add-on installs onto your factory rear spoiler using the included hardware. This component will require minor drilling to achieve a proper fit.
Application. The V3R Wicker Bill Gloss Black Rear Spoiler Add-On fits all 2015-2022 Dodge Challenger models.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 2 Hours
Light to Moderate mechanical skill required.
What's in the Box
10 More Questions