Increase Power and Performance.
Further enhance the performance of your 2011-2014 3.6L Pentastar V6 Dodge Challenger with inTune i3 Platinum Tuner. The inTune i3 Platinum Tuner supports third party custom tune files and also comes preloaded with Diablosport's very own pre-configured tune files. When your Challenger rolled off the assembly line, Dodge programmed it to cater to the needs of the daily driver, not the performance enthusiast who adds aftermarket bolt-on modifications in the search of more power. So, if your Challenger is bone stock or if you have added a cold air intake, throttle body or exhaust mods, you should invest in a Diablosport inTune i3 Platinum Tuner to see the full power potential your Challenger can make.User Adjustable.
DiabloSport designed their Tuner to be user adjustable. This means you can make further changes to the tune files to suit your particular performance needs. Please note that not all adjustments listed below are available on all vehicles.
- Calibrate Speedometer for Gear Ratio
- Calibrate Speedo for Tire Size
- Cooling Fan Control
- Disable ESP
- Throttle Booster
- Fuel Rich/Lean Adjustment
- Spark Timing Advance/Retard
- Idle RPM
- Top Speed Limiter
- Rev Limiter
- Disable Active Fuel Management
The inTune i3 Tuner is WiFi-capable meaning you will no longer have to plug it into your Mac, Windows or Linux computer to receive the latest Diablosport firmware updates, but that is still an option. Once setup with your Wi-Fi password, the inTune i3 will download the latest firmware updates via the internet.Data Logging and Monitoring.
With a full color, high-resolution touch screen display, the Diablosport inTune i3 Tuner makes it easy to read the Built-In Data Logging and/or the Real Time Data, so you can view popular sensor data such as EGT, Air/Fuel Ratio or any other 0-5 Volt source.Diagnostics Tool.
The inTune i3 Tuner can also be used as a diagnostic code reader. Save yourself hundreds of dollars each year by reading and clearing your own Diagnostic Trouble Codes (DTCs) rather than paying a dealer to do the same. It's as easy as a few simple steps.Easy to Load; Easy to Restore.
When you load your DiabloSport tune on your Challenger, the tuner automatically stores your vehicle's factory settings. To return to the original factory settings, just plug the tuner back in, select the option to restore the factory settings, and you're done. This is ideal for visiting dealerships for warranty work.Not CARB Certified.
The inTune i3 Platinum Tuner is not CARB certified, therefore it is not legal for use in California or any other state adopting California emission standards. Not intended for use on pollution controlled motor vehicles. If you require a tuner that is CARB certified please see Diablosport part# 8300.Application.
This Diablosport inTune i3 Platinum Tuner is specifically designed for 2011-2014 Dodge Challenger models equipped with the naturally aspirated 3.6L Pentastar V6 engine. This Tuner supports custom tune files which are available separately.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov