Free Shipping On Orders Over $49. Details

Talk to a Challenger Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 In Store Credit Enter Now

Edelbrock E-Force Stage 1 Street Supercharger Kit without Tuner (08-10 6.1L HEMI)

Item CH3280
AmericanMuscle no longer carries the Edelbrock E-Force Stage 1 Street Supercharger Kit without Tuner (08-10 6.1L HEMI). Please check out Home for an updated selection.
Call a Challenger Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P

    Product Information

    Features, Description, Q&A, Specs & Installation


    • E-Force Stage 1 Street Supercharger Kit
    • Generates Up to 556 Horsepower and 501 Pound-Feet of Torque
    • Utilizes Eaton 6th Generation 2300 Supercharger Assembly
    • High Helix 4-Lobe Rotors With 160-Degree Twists
    • With an Internal Bypass Valve to Minimize Parasitic Loss
    • CARB-Certified Under CARB E.O. Number D-215-89
    • Complete Bolt-On System Requiring Professional Installation
    • Fits All 2008-2010 6.1L HEMI Dodge Challenger Models


    Remarkable Engine Boost. Let your Challenger powerfully dash with reinforced engine power by using the E-Force Stage 1 Street Supercharger Kit without Tuner. Edelbrock designed this supercharger system to increase your engine’s power output and the resulting torque by enhancing the volumetric efficiency of the air charge with minimum temperature rise and quiet operation.

    Premium Components. This complete E-Force package transforms your Challenger into a dynamic beast. It comes with an Eaton Gen VI 2300 Supercharger with an appealing, black finish, a large intercooler, heat exchanger, fuel injectors, fuel rails, pulley, hoses, and wiring harnesses. Edelbrock also included an intercooler water pump, recovery tank, intake tube, and air filter.

    High Performance R2300 Core. Utilizing Eaton’s latest 6th generation supercharger rotor technology, this kit features twin 4-lobe rotors with 160 degrees of twist. This higher helix angle provides higher volumetric efficiency and improved air flow qualities for an enhanced performance. The geometry of the inlet ports were re-engineered for optimum air flow with minimal drag. Moreover, this supercharger is furnished with an integrated bypass valve to maximize your engine’s efficiency during cruising by minimizing parasitic loss. This low power requirement to turn the rotors also significantly improves fuel economy.

    Calibration Required. For the best possible performance from this E-Force Supercharger Kit, a custom tune is needed to calibrate your Challenger’s ECU. While this package does not come with a tuner, you can download the application-specific program from Edelbrock’s website. This program will retain the factory vehicle speed limiter setting for safety.

    CARB-Compliant. This E-Force Supercharger is CARB certified under E.O. number D-215-89 but is only emissions-legal when used with the correct Edelbrock program. The precise tunes can be downloaded from the manufacturer’s website.

    Application. The Edelbrock E-Force Stage 1 Street Supercharger Kit without Tuner is specifically designed for all 2008-2010 6.1L HEMI Dodge Challenger models.

    Technical Notes. This E-Force Stage 1 Supercharger Kit is sensitive to corrosion. As such, only premium fuel, 91 octane, or better is highly recommended for use. If your vehicle has been filled with anything less, it must be run until almost dry and refilled with 91 or higher octane gasoline twice prior to installation.

    Fitment: Details

    CA Residents: WARNING: Cancer and Reproductive Harm -

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (1) Supercharger Unit
    • (1) Manifold Assembly
    • (1) Cast Aluminum Idler Bracket
    • (1) Heavy-Duty Automatic Belt Tensioner
    • (1) Liquid-to-Air Intercooler
    • (1) Intercooler Water Pump
    • (1) Intercooler Recovery Tank
    • (1) Air Intake Tube
    • (1) Air Filter
    • (8) Fuel Injectors
    • (2) Fuel Rails
    • (1) Front Fuel Crossover
    • (1) Rear Fuel Crossover
    • (1) Heat Exchanger
    • (1) Pulley Belt
    • (1) MAP Sensor Harness
    • (1) Fuse Tap
    • (1) IAT Extension Harness
    • (1) Water Pump Harness
    • (1) ETC Extension Harness
    • (1) Driver Side PCV
    • (1) Passenger Side PCV
    • (1) EVAP to Air Inlet Hose
    • (1) Transmission Cooler Extension
    • (1) Reservoir to Water Pump Hose
    • (1) Water Pump to Heat Exchanger Hose
    • (1) Intercooler to Reservoir Hose
    • (1) Heat Exchanger to Intercooler Hose
    • (1) Brake Booster to Air Inlet Hose
    • Installation Hardware

    Questions & Answers

    10 More Questions

    Will It Fit My Challenger