(approx) 1 Hour
Light to Moderate mechanical skill required.
Hey everybody I'm Justin with AmericanMuscle.com, and this is going to be my review of the MBRP Axle-Back Exhaust System available for your 2005 to 2010 Mustang GT in your choice of either an aluminized steel construction or a full stainless build.The MBRP System here is going to be for any '05 to '10 owner out there who is looking to get some more volume out of his or her ride but without emptying your wallet in the process. Now in fact the aluminized steel version which I do have on the table here in front of me is going to be one of the most affordable axle backs for your three-valve here on the site priced in line with that and some of the pipe stuff but yet a far cry from some of the more premium options such as Corsa or LTH. Sticking with the MBRP aluminized steel version I have here again, guys, a great budget system. But MBRP does offer again this same exact kit but in a full stainless version. It's going to offer all those durability and appearance benefits you come to expect from a stainless build, and it's only going to be a few bucks more, very reasonable overall. Now both systems do utilize the same formula. You're going to get some rounded chambered mufflers here, 2.5 mandrel bend on the tubing, finally 3.5 inch slash cut tips as per the MBRP logo.Now despite the difference in materials between the aluminized steel and full stainless, you can expect roughly the same tone from both systems thanks largely in part to the fact that they utilize the same muffler. After hearing this system in person and reading some of the reviews, I can definitely agree that this thing's going to offer a nice aggressive tone, but it's going to be clean overall, not very raspy or anything like that, offer a great presence with zero drone whatsoever. For that reason alone, I'm going to give it a solid three out of five on our overall loudness meter with one being close to relatively stock and five just being crazy loud. Moving on to the installation. Now getting a new axle-back installed onto your three-valve, not a big deal whatsoever. Very easy job. So for that reason alone, we're going to give it a solid one out of three wrenches on our overall difficulty meter. Now figure about an hour or two before you're making some noise, of course you want to have your jack and jack stands ready or ramps or a lift if you're one of the lucky ones out there and figure an assortment of hand tools, sockets, things like that and you should be able to get this thing banged out, no problem.So if you're on a tight budget or maybe you're saving up for some other mods but rolling around in a stock or quiet GT is certainly not going to apply, then I think the MBRP system here is going to be a great option for your '05 to '10 Mustang GT, and you can grab your set right here at AmericanMuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2005 2006 2007 2008 2009 2010 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 24, 2019
A Little Rumble
product was just as described. It gives that rumble that leaves you thinking it is up to something, not to loud not to soft but when you hear it you know that something just isn't stock. When you get on it you know you were rightHelpful (0)
October 30, 2019
nice product easy to install no drone, a little too quiet...Helpful (0)
July 07, 2019
Deep nice growl, perfect tone for my Stang, very happy w my purchase.Helpful (0)
April 18, 2019
Great value for the money!
Product was delivered fast and undamaged. Was an obvious install, 2 clamps and 2 hangers to deal with. That being said the fit is good. Also I am very happy with the tone. I was looking for a deeper tone and that's what they deliver.Helpful (0)
January 11, 2019
For anyone looking for an amazing sounding axle back system with an off-road setup... this is perfect. I have an off-road h pipe setup and I wanted a much deeper and older muscle car sound and that’s exactly what these produce. They aren’t too loud but they aren’t too quiet either. If you ran these with cats I believe they would be much too quiet. They do idle almost as quiet as stock mufflers but when you step on it they are 10 times louder atleast. I would put them in the middle as far as loudness goes between stock and a muffler delete setup. So if you aren’t trying to wake the dead and you just want something that sounds amazing and is decently loud then these are a very good choice. Also for anyone wondering the same question I was... the mbrp installer series (270$) and the mbrp pro series (400$) are the exact same muffler and sound identical, the only difference is the pro series is made from a different steel on the outside to prevent rust from accruing much longer. Very happy with these!Helpful (2)
December 14, 2018
MBRP axle back exhaust stainless steel
Great fit and excellent sound. Deeper tone than the stock exhaust when at idle or lower rpms. When you step on it there is a definite increase in noise yet fairly quiet when cruising down the highway!Helpful (2)
December 02, 2018
The perfect balance. Not too loud, but you know it is there,Helpful (3)
November 24, 2018
Mbrp axles backs.
They sound great .Just what I wanted.Lounder than stock and deeper sound.everybody likes them.Easy to put on and fit just right.Thanks for American Muscle for there video on the Axle Backs let you hear them before buying.And rating of loudness.Thank youHelpful (3)
November 02, 2018
Finally...an exhaust that works as advertised...
OK - first the good - these mufflers look and sound great on my 08 Bullitt with Kooks LT headers and high flow cats - and even better with Flowmaster resonators. Nice deep rumble and growl - turns heads yet quiet at highway speeds. I drive about 400 miles a week and I never get tired of the sound - it's music to my ears. Now for the bad - there isn't any!Helpful (2)
August 02, 2018
Got these after old exhaust lived its last day. These sound great, they are a little quiet compared to other options, but have a great v8 rumble.Helpful (3)
I'm interested in the MBRP all Stainless Steel Muffler, yet you don' show t or the price? how much is the Stainless Steel version?
What is the difference between this muffler and the MBRP installer muffler?
There is no difference in the muffler when comparing the MBRP Pro Series Axle-Back Exhaust and the MBRP Installer Series Axle-Back Exhaust, both feature Chambered Mufflers. The difference is in quality of materials and warranty.
Will these fit my 2007 gt/cs
Yes, this will fit you 2007 gt/cs
(approx) 1 Hour
Light to Moderate mechanical skill required.
What's in the Box
|Piping Material:||304 stainless steel||Tip Material :||Polished 304 stainless steel|
|Piping Size:||2.5"||Tip Size:||3.5"|
|Muffler Type:||Chambered||Fitment:||2005-2010 GT Mustangs|