(approx) 1 Hour
Simple installation for anyone.
$144.99 (each)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2015 2016 2017 2018 2019 2020
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
April 02, 2020
If you’re looking for a Phantom Grill
Exactly what I was looking for! Quality product - Low price With a few adjustments To the shape and better hardware from Home Depot, the installation was easy and it looks great!!!!!Helpful (0)
March 19, 2020
First impressions after trying a dry fit on my 2016 Challenger RT. It is a beautiful piece of hardware. The dry fit makes the front look so great. However, I see no way to effectively install this thing without removing the full front bumper. Still assessing, but at this point, that seems like far too much work and risk of scratching the front end to justify for this grill overlay. Again, the look is great, but seriously, having to remove the front bumper assembly to install means if I need to access the front of lights or inner grill, I'd have to drop the bumper again. Seriously, AM, you should have provided a more honest heads-up! I'll update more after I decide what to do.Helpful (1)
January 13, 2020
Great product. Had to remove the bumper but very easy install !Helpful (0)
January 03, 2020
I have 2019 Scat Pack. I would have to remove the entire bumper in order to affix this correctly. Not gonna happen. Wasted my money.Helpful (0)
November 23, 2019
Upper and lower Billet Gril
Both parts are nice, durable, with the upper arriving two days ahead of time. Now let’s get to the meat and potatoes. Despite the company saying that the upper can be installed with the grill intact, that’s not the case for the 2019 Challenger. The entire front bumper had to be removed. It took several hours. Normally it doesn’t take me long to install anything, however, the tools stated that was needed for use failed to state that a long Phillips screwdriver (preferably magnetized) was needed. A normal Phillips screwdriver will not work for the upper. You can use a normal screwdriver for the lower. The lower was a little more difficult due to it being so low to the ground. I did the lower first because I knew the upper would be easier, and it was. I used blue medium thread locker because I don’t trust the hardware that accompanied my purchase. The Phillips screw looks as if it can go through the grill. I shopped for a washer but couldn’t find one that could fit it. The blue thread locker provide sturdiness and you can unscrew it if need be in the future. Finally, two sets of hands are better than one. This is another reason it took so long. I took a couple of pictures after installation and a test drive. It was dark after I finished it.Helpful (0)
October 09, 2019
2017 challenger rt
2 day shipping. Had to buy different bolts nuts and washers to install. Hardware didn’t work with my 2017 challenger. Looks meaner.Helpful (0)
August 23, 2019
Great looks, really makes a big difference in appearance and you stand out from the factory Challenger's around you. I have put these phantom grilles on my chevy trucks since 93 it's usually the first mod i make to the vehicles i own.Helpful (0)
June 21, 2019
Very Well Made
The product is made very well except the hardware that came with it does not fit 2018 grill.Helpful (1)
March 01, 2019
Looks incredible, adds oldschool look h its came so fast IHelpful (0)
* Why is the such a variance between the estimated install time in the PDF document of ONE hour and the reported install time stated by the customers, 4 to 8 hours (afternoon to all day). * Several say they had to drop the entire bumper. Why the different experiences where instruction say NO NEED and customers see the need? * Is the hardware really inadequate as mentioned or is this just a preference by some customers? This item has been in my cart for a couple days and these inconsistencies are keeping me form ordering.
well, the 1320 being a special edition theres is no "blacktop" packages to choose from. No track pack either. Its the 6.4l hemi without anything forcing air. And the 8 speed automatic is manfatory. comes with special drag radials from nexen. I have the build sheet, maybe if you can tell me what are the problematic parts exactly. There is all other model in the roll down menu.not the 1320. Maybe you could add it? thanks
This product fits 2015-2019 Dodge Challenger Models.
Will this fit the 2019 challenger edition 1320
As long as you do not have the Super Track Pack or Blacktop packages, then this will indeed fit.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box