Talk to a Challenger Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Eibach Pro-Alignment Camber Bushing Kit (08-23 Challenger)

Item CH1131
Verify parts fit and get product recommendations.
Challenger Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Our Price

$95.00 (pair)

FREE Shipping on orders over $119 Market Price $110.99 You Save 14% ($15.99) Up to 10% off for Military & First Responders! See Details

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      Jake here for AmericanMuscle, and today I'm taking a look at the Eibach Pro-Alignment Camber Bushing Kit fitting 2008 to 2023 Challengers. Now when it comes to suspension even the most minute of adjustments can have a big impact on your ride and handling. If you've got some suspension mods on your Challenger or even if you just want to push the limit of your stock vehicle, Camber is one of the things that can affect it the most. And this kit from Eibach is going to be an easy and affordable way to adjust in more camber, make your Challenger more stable on the street or on the track.Getting your alignment right is absolutely crucial to handling, especially with a heavy car like the Challenger. Camber is especially important for this as it can affect not only tire wear, but also how your vehicle behaves in a corner. If you're not familiar, camber is measured in degrees and it refers to the angle of the wheels when you're looking dead-on at them from either the front or rear of the car. Now most cars from the factory are going to come pretty much with zero degrees of camber. Now negative camber means that the wheels and tires will be angled in at the top, towards the center of the car with positive camber being the opposite, tops of the wheels and tires are going to be pointing out away from the center of the car. Now a bit of positive camber is good if you're going to be weighing your car down, but negative camber is better for handling as when the car leans into a turn and the suspension loads up, more of the tire is going to come into contact with the road. But as with anything you want this in moderation, otherwise, you're going to burn through tires and compromise your ride and handling.Now stock you don't have a lot of adjustment on these cars, but the bushings will give you a little bit more. It's going to get you between -1.5 degrees to +1.5 degrees of camber, which may not sound like a whole lot, but it's a pretty big amount of adjustment. It's enough to get your wheels properly aligned to give you more grip, help your tires last longer too. So whether you're hitting the track, carving corners, or driving on the street, this is going to be a big benefit. Now it is worth knowing that these are sold as a pair and they are only for the rear end of the car, but that's where the issue of either too much or not enough camber is likely to occur. If you got too much, you're going to be burning through the insides of your rear tires really fast and have to replace them. So these are going to give you exactly what you need to get everything corrected. However, if you need adjustment in the front too, Eibach does offer a front camber arm kit with the similar type of bushings and some more adjustment for the front end. And we also have that available on our site.So what we've got here are basically all new replacement bushings, and they're a little bit more rigid than your factory rubber ones. On the outside and inside of the actual rubber bushing itself, you've got some nice metal here, and you've even got stamped indicators on the outside to tell you where you need to adjust this. So these are going to be more rigid than your factory rubber ones. They're going to make things a little bit more stiffer, again, a little bit more rigid than what you get from the factory. And if your car has some miles on it, these are also going to offer you a nicely refreshed feel, again, because they're going to have a much tighter bushing on the inside. As you can hopefully see here, these are rubber bushings on the inside. These are not polyurethane, so they're going to have a little bit more give to them. It's not going to make your car too overly stiff for the street. Again, going to give you that nice, new, refreshed feel. And of course, they have that greater range of adjustment than your factory bushings as well. So you'll be able to get more camber angle dialed in. And it's also going to hold better as well, making this a little bit better of a solution than just cranking up your stock ones.Pricing comes in at about $120 and that makes them a super economical solution to get the camber and adjustment you need without having to spend a ton of money. Now these are going to far undercut the price of a set of adjustable arms, but we will net you similar results. You're not going to have quite the amount of adjustment that you would with arms, but again, these are going to be worlds better than your factory bushings. Installation gets a two out of three and should take you around three hours to complete. Now these are going to swap right in, you don't need to make any modifications. While you can install these at home, since these are critical suspension parts that affect your alignment, do make sure you get your car properly aligned by a professional once you've got these installed. You may also need to do a little bit of trickery to get the original bushings out, depending on how long they've been in there or how stiff they are. That's going to do it for our review of the Eibach Pro-Alignment Camber Bushing Kit fitting 2008 to 2023 Challengers. Thanks so much for watching and as always, for all things Challenger, be sure to keep it right here at AmericanMuscle.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features & Specs

      • Pro-Alignment Camber Bushing Kit
      • Delivers Precise Camber Alignment
      • Lowers 1/4-Mile ETs
      • Improves Traction and Reduces Wheel Spin
      • Keeps Tires from Uneven and Pre-Mature Wear
      • Ideal for Street and Track Tuning
      • Adjustment Range: -1.50° to +1.50° Degrees Camber
      • Sold as a Pair
      • Protected by a 1-Year Warranty
      • Fits all 2008-2023 Dodge Challenger Models

      Description

      Corrects Camber Alignment. If you have a modified or lowered Dodge Challenger, one of the things that you should always look at is if your wheel cambers are perfectly aligned. Lowering the suspension of your ride causes the wheels to tilt inwards at the top. If kept for long, this may cause issues on your ride’s performance. Thanks to the Eibach Pro-Alignment Camber Bushing Kit, you won’t have to spend the big bucks in order to maintain the perfect wheel camber alignment for your ride. With these Camber Bushings installed on your Dodge Challenger, you’re sure to get the precise amount of correction needed to reverse the negative camber back to stock specs.

      Function and Durability. Each Pro-Alignment Camber Bushing Kit is crafted from top-grade stainless steel that’s guaranteed to withstand years of street and track use. This camber bushing kit is designed to deliver a controlled weight transfer, thus allowing you to enjoy the benefits of maximum traction and greatly minimized wheel spin. Even better, this will also prevent premature and uneven tire wear so you can have longer rides without a hitch.

      Wide Range of Compatibility. You can use this camber bushing kit on all sport-lowered suspensions and not just Eibach-branded kits. Each camber bushing is designed with a wide variety of camber adjustments that are perfect for street and track tuning applications.

      One-Year Protection. For a term of 1 year, this Pro-Alignment Camber Bushing Kit is backed by a limited warranty. While under the warranty period, Eibach will cover for any factory flaws found in both material and workmanship. You may visit the manufacturer’s website to know more about the warranty limitations and exclusions.

      Application. This Eibach Pro-Alignment Camber Bushing Kit is ideal for use with all 2008-2023 Dodge Challenger models.

      Fitment:

      Eibach 5.66050K

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (2) Camber Bushings
      4.8

      Customer Reviews (382)

        Questions & Answers

        10 More Questions