Free Shipping On Orders Over $49. Details

Talk to a Challenger Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$4,500 Giveaway! 3 Winners Enter Now

SR Performance Cold Air Intake (11-14 6.4L HEMI)

Item CH1042
AmericanMuscle no longer carries the SR Performance Cold Air Intake (11-14 6.4L HEMI). Please check out 2008-2020 Dodge Challenger Cold Air Intakes for an updated selection.
Call a Challenger Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P

Features & Details

  • Improves Airflow for More Power
  • Increases Throttle Response and Performance
  • Polished Aluminum Intake Tube
  • Reusable High Flow Air Filter
  • Simple Bolt-On Installation
  • No Computer Re-Tune Required
  • Not CARB Certified
  • Fits 2011-2014 6.4L V8 Dodge Challenger Models
Better Flow for More Power. Get even more power out of your already powerful 2011-2014 392 Hemi Challenger by upgrading to a SR Performance Cold Air Intake. By replacing your Challenger's restrictive factory intake with a high flow filter assembly you will see and feel a noticeable increase in rear wheel horsepower and torque. This SR Performance Intake not only improves airflow for an increase in power, but it will also add a show winning appearance to the engine bay with its brightly polished aluminum intake tube.

No Tune Required. SR Performance engineered their Cold Air Intake to improve the performance of your V8 Challenger without the need of reprogramming your computer. By utilizing flow dynamics, this Intake will increase power using the original factory tune. Even though a re-tune is not required for operation, AmericanMuscle recommends a custom tune to reprogram the vehicles computer (ECU) to get the best possible performance from this Cold Air Intake.

Reusable Air Filter. The included high flow air filter effectively filters out power robbing particles with its multi layer design. The specially treated media creates a sticky surface to capture microscopic contaminants before they can enter your Challenger's engine and do harm. Seeing that the filter is reusable there is no need to buy a new filter every few thousand miles. You can just clean the filter, re-oil it, and reinstall - saving yourself money in the long haul.

Simple Bolt-on Installation. SR Performance designed their Cold Air Intake kit to be a direct bolt-on replacement. With no special tools or extra modifications required installation can be completed in under an hour. All parts and detailed instructions are included.

Not CARB Certified. This SR Performance Cold Air Intake is not CARB certified, therefore it is not legal for use in California or other states adopting California emission standards. Not legal for use on pollution controlled motor vehicles; intended for off road use only.

Application. This SR Performance Polished Cold Air Intake System is specifically designed to fit the 2011-2014 Dodge Challengers equipped with the 6.4L Hemi V8 engine.

SR Performance

Fitment: Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
  • (1) Intake Tube
  • (1) Heat Shield
  • (1) Air Filter
  • (2) Rubber Seals
  • (1) Flex Coupler
  • (1) Reducer Coupler
  • (1) 5/8-inch Breather Hose
  • (1) 3.5-inch Hose Clamp
  • (3) 4-inch Hose Clamp
  • (1) 1/2-inch ID Grommet
  • (1) 4-inch Offset Velocity Stack Adapter
  • (1) 6-inch Hose Clamp
  • (1) #8 Mini Clamp
  • (1) 3/8-inch Bolt
  • (1) Rubber Insert
  • (1) 3/8-inch Washer
Installation Info
Will it fit my Challenger?

    Customer Photos

      Q & A

      No questions about this product yet.

      Ask the First Question

        Customer Reviews (1) Write a Review

        Ratings Summary

        5 out of 5 overall rating from 1 customers

        Installation Time: Less than 1 Hour





        • October 25, 2019

          5 2014 SRT8 - Terrylee Installation Time: Less than 1 Hour

          Great Performance Addition

          Great Item fits well, easy installation and Looks Great!!

          Helpful (0)